注塑机IMM3200

模具

塑料配件

注塑机

宁波帆倍利塑模有限公司

地址：宁波余姚模具城
TEL: (86)574-87793491,(86)574-87793492
FAX: (86)574-87792835
URL: http://www.fbelemould.com
E-mail: sales@fbelemould.com zhou574@hotmail.com zhou574

首页

IMM3200

注塑机IMM3200

IMM3200
产品描述

Specification:
Feature
1. Clamp unit

??The clamping unit is quick moving platen, running placidity moving speed over 36m/min.
??Moving platen supported on the machine bed by adjustable slipping block that made zinc metal, it open and close quickly

and lightly.

??End point positioning controlled by high precision transducers.
??Tie bars painting hardened Cr can able to bear or endure cauterization and abrasion.

??Tie bars with unload slot marches spring nut can be constant of using for long time.
??closing and opening speeds independently set, each programmable in 3 stages. It may be alarm automatic at abnormality.

??five points holding pressure to clamping processes computer-optimized.
2. Injection unit

??n opposed cylinders ensure parallel injection movement.
??ew cylinders suitable for up to A, B, C. The screw may be optional 3 kinds of nitride, painting hardening Cr and double

metals.

3. Hydraulic system
??ustable backpressure and zero backpressure may be option.

??egrations valve board is response soon and high precision.
??raulic system can be able to overload running, sensitive to reasonability, lower pulse and higher stabilization.

4. Electrical control unit
a) There is 3-manners of manual, semi-auto, automatic in the menu.

b) Controlled several section PID temperatures, monitoring, alarm and diagnosing.
c) The menu of special computer imported has two color: one is black and write, other color.

SPECIFICATION
A B C D
INJECTION UNIT
SCREW DIAMETER mm 67 70   75
SCREW L/D RATIO L/D 22.5 21.5 20
SHOT VOLUME(THEORETICAL) cm3 905 987 1134
INJECTION WEIGHT(PS) g 826 900 1032
INJECTION RATE g/s 288 315 361
PLASTICIZING CAPACITY g/s 38 40 43
INJECTION PRESSURE MPa 186 171 148
SCREW SPEED rpm 160
CLAMPING UNIT
CLAMP FORCE kN 3200
OPEN STROKE mm 660
SPACE BETWEEN TIE BARS(W*H) mm 660*660
MAX.MOULD HEIGHT mm 720
MIN.MOULD HEIGHT mm 250
EJECTOR STROKE mm 160
EJECTOR FORCE kN 70
OTHER
MAX.PUMP PRESSURE MPa 16
PUMP MOTOR POWER kW 37
HEATING POWER kW 17.25
MACHINE DIMENSION(L*W*H) m 6.30*1.70*2.40
OILTANK CUBAGE L 620
MACHINE WEIGHT t 12.5
相关产品展示

IMM16600 注塑机IMM16600
IMM14000 注塑机IMM14000
IMM11000 注塑机IMM11000
IMM8800 注塑机IMM8800
IMM7300 注塑机IMM7300
IMM6000 注塑机IMM6000
IMM4900 注塑机IMM4900
IMM3800 注塑机IMM3800

注塑机IMM3200

IMM3200

产品描述

相关产品展示