注塑机IMM8800

产品描述

Specification:
 Feature
  1. Clamp unit
 
 ??The clamping unit is quick moving platen, running placidity moving speed over 36m/min.
  ??Moving platen supported on the machine bed by adjustable slipping block that made zinc metal, it open and close quickly and lightly.
 
 ??End point positioning controlled by high precision transducers.
  ??Tie bars painting hardened Cr can able to bear or endure cauterization and abrasion.
 
 ??Tie bars with unload slot marches spring nut can be constant of using for long time.
  ??closing and opening speeds independently set, each programmable in 3 stages. It may be alarm automatic at abnormality.
 
 ??five points holding pressure to clamping processes computer-optimized.
  2. Injection unit
 
 ??n opposed cylinders ensure parallel injection movement.
  ??ew cylinders suitable for up to A, B, C. The screw may be optional 3 kinds of nitride, painting hardening Cr and double metals.
 
 3. Hydraulic system
  ??ustable backpressure and zero backpressure may be option.
 
 ??egrations valve board is response soon and high precision.
  ??raulic system can be able to overload running, sensitive to reasonability, lower pulse and higher stabilization.
 
 4. Electrical control unit
  a) There is 3-manners of manual, semi-auto, automatic in the menu.
 
 b) Controlled several section PID temperatures, monitoring, alarm and diagnosing.
  c) The menu of special computer imported has two color: one is black and write, other color.
 
 
 
SPECIFICATION  
A B C D
INJECTION UNIT  
SCREW DIAMETER  mm  90  100 110  115 
SCREW L/D RATIO  L/D 22.3  20  18.2  17.4 
SHOT VOLUME(THEORETICAL)  cm3  2920 3610  4369  4778 
INJECTION WEIGHT(PS)  g  2670  3300  3980  4352
INJECTION RATE  g/s  580  717  867  948
PLASTICIZING CAPACITY  g/s  77  95  118  129
INJECTION PRESSURE  MPa  216  176  146  133
SCREW SPEED  rpm  110
CLAMPING UNIT  
CLAMP FORCE  kN  8800
OPEN STROKE  mm  1000
SPACE BETWEEN TIE BARS(W*H)  mm  1080*1000
MAX.MOULD HEIGHT  mm  1100
MIN.MOULD HEIGHT  mm  400
EJECTOR STROKE  mm  325
EJECTOR FORCE  kN  245
OTHER  
MAX.PUMP PRESSURE  MPa  16
PUMP MOTOR POWER  kW  37+45
HEATING POWER kW  47.25
MACHINE DIMENSION(L*W*H)  m  11.55*2.68*2.90
OILTANK CUBAGE L  1700
MACHINE WEIGHT  t  53

相关产品展示