注塑机IMM1600

产品描述

Specification:
 Feature
  1. Clamp unit
 
 ??The clamping unit is quick moving platen, running placidity moving speed over 36m/min.
  ??Moving platen supported on the machine bed by adjustable slipping block that made zinc metal, it open and close quickly and lightly.
 
 ??End point positioning controlled by high precision transducers.
  ??Tie bars painting hardened Cr can able to bear or endure cauterization and abrasion.
 
 ??Tie bars with unload slot marches spring nut can be constant of using for long time.
  ??closing and opening speeds independently set, each programmable in 3 stages. It may be alarm automatic at abnormality.
 
 ??five points holding pressure to clamping processes computer-optimized.
  2. Injection unit
 
 ??n opposed cylinders ensure parallel injection movement.
  ??ew cylinders suitable for up to A, B, C. The screw may be optional 3 kinds of nitride, painting hardening Cr and double metals.
 
 3. Hydraulic system
  ??ustable backpressure and zero backpressure may be option.
 
 ??egrations valve board is response soon and high precision.
  ??raulic system can be able to overload running, sensitive to reasonability, lower pulse and higher stabilization.
 
 4. Electrical control unit
  a) There is 3-manners of manual, semi-auto, automatic in the menu.
 
 b) Controlled several section PID temperatures, monitoring, alarm and diagnosing.
  c) The menu of special computer imported has two color: one is black and write, other color.
 
 
 
SPECIFICATION
 
 
A
 B
 C
 D
 
INJECTION UNIT
 
 
SCREW DIAMETER
 mm
 42
  45
 50
 
 
SCREW L/D RATIO
 L/D
  21.4
  20
  18
 
 
SHOT VOLUME(THEORETICAL)
 cm3
  278
  320
  395
 
 
INJECTION WEIGHT(PS)
 g
  253
  297
  359
 
 
INJECTION RATE
 g/s
  120
  138
  170
 
 
PLASTICIZING CAPACITY
 g/s
  22
  25
  28
 
 
INJECTION PRESSURE
 MPa
  200
  170
  140
 
 
SCREW SPEED
 rpm
  180
 
CLAMPING UNIT
 
 
CLAMP FORCE
 kN
  1600
 
OPEN STROKE
 mm
  430
 
SPACE BETWEEN TIE BARS(W*H)
 mm
  450*450
 
MAX.MOULD HEIGHT
 mm
  520
 
MIN.MOULD HEIGHT
 mm
  200
 
EJECTOR STROKE
 mm
  135
 
EJECTOR FORCE
 kN
  45
 
OTHER
 
 
MAX.PUMP PRESSURE
 MPa
  16
 
PUMP MOTOR POWER
 kW
  18.5
 
HEATING POWER
 kW
  10.35
 
MACHINE DIMENSION(L*W*H)
 m
  4.90*1.52*2.00
 
OILTANK CUBAGE
 L
  260
 
MACHINE WEIGHT
 t
  6

相关产品展示