注塑机IMM2000

产品描述

Specification
 Feature
  1. Clamp unit
 
 ??The clamping unit is quick moving platen, running placidity moving speed over 36m/min.
  ??Moving platen supported on the machine bed by adjustable slipping block that made zinc metal, it open and close quickly and lightly.
 
 ??End point positioning controlled by high precision transducers.
  ??Tie bars painting hardened Cr can able to bear or endure cauterization and abrasion.
 
 ??Tie bars with unload slot marches spring nut can be constant of using for long time.
  ??closing and opening speeds independently set, each programmable in 3 stages. It may be alarm automatic at abnormality.
 
 ??five points holding pressure to clamping processes computer-optimized.
  2. Injection unit
 
 ??n opposed cylinders ensure parallel injection movement.
  ??ew cylinders suitable for up to A, B, C. The screw may be optional 3 kinds of nitride, painting hardening Cr and double metals.
 
 3. Hydraulic system
  ??ustable backpressure and zero backpressure may be option.
 
 ??egrations valve board is response soon and high precision.
  ??raulic system can be able to overload running, sensitive to reasonability, lower pulse and higher stabilization.
 
 4. Electrical control unit
  a) There is 3-manners of manual, semi-auto, automatic in the menu.
 
 b) Controlled several section PID temperatures, monitoring, alarm and diagnosing.
  c) The menu of special computer imported has two color: one is black and write, other color.
 
 
 
SPECIFICATION  
A B C D
INJECTION UNIT  
SCREW DIAMETER  mm  45 50   55  
SCREW L/D RATIO  L/D  23.3  21  19.1  
SHOT VOLUME(THEORETICAL)  cm3  340  420  510  
INJECTION WEIGHT(PS)  g  310  383  466  
INJECTION RATE  g/s  124  154  186  
PLASTICIZING CAPACITY  g/s  20.8  24.4  28.2  
INJECTION PRESSURE  MPa  210  168  140  
SCREW SPEED  rpm  180
CLAMPING UNIT  
CLAMP FORCE  kN  2000
OPEN STROKE  mm  475
SPACE BETWEEN TIE BARS(W*H)  mm  505*505
MAX.MOULD HEIGHT  mm  530
MIN.MOULD HEIGHT  mm  200
EJECTOR STROKE  mm  140
EJECTOR FORCE  kN  70
OTHER  
MAX.PUMP PRESSURE  MPa  16
PUMP MOTOR POWER  kW  18.5
HEATING POWER kW  12.45
MACHINE DIMENSION(L*W*H)  m  5.30*1.60*2.00
OILTANK CUBAGE L  260
MACHINE WEIGHT  t  7

相关产品展示