injection machine IMM11000

Description

Specification:
 Feature
  1. Clamp unit
 
 The clamping unit is quick moving platen, running placidity moving speed over 36m/min.
  Moving platen supported on the machine bed by adjustable slipping block that made zinc metal, it open and close quickly and lightly.
 
 End point positioning controlled by high precision transducers.
  Tie bars painting hardened Cr can able to bear or endure cauterization and abrasion.
 
 Tie bars with unload slot marches spring nut can be constant of using for long time.
  closing and opening speeds independently set, each programmable in 3 stages. It may be alarm automatic at abnormality.
 
 five points holding pressure to clamping processes computer-optimized.
  2. Injection unit
 
 n opposed cylinders ensure parallel injection movement.
  ew cylinders suitable for up to A, B, C. The screw may be optional 3 kinds of nitride, painting hardening Cr and double metals.
 
 3. Hydraulic system
  ustable backpressure and zero backpressure may be option.
 
 egrations valve board is response soon and high precision.
  raulic system can be able to overload running, sensitive to reasonability, lower pulse and higher stabilization.
 
 4. Electrical control unit
  a) There is 3-manners of manual, semi-auto, automatic in the menu.
 
 b) Controlled several section PID temperatures, monitoring, alarm and diagnosing.
  c) The menu of special computer imported has two color: one is black and write, other color.
 
 
 
SPECIFICATION  
A B C D
INJECTION UNIT  
SCREW DIAMETER  mm  110 115  120  125 
SCREW L/D RATIO  L/D 21.5  20  19.2  18.4 
SHOT VOLUME(THEORETICAL)  cm3  4430  4850 5251  5706 
INJECTION WEIGHT(PS)  g  4031 4413  4778  5241 
INJECTION RATE  g/s  793 867  944  1024 
PLASTICIZING CAPACITY  g/s 122  134  146  158 
INJECTION PRESSURE  MPa  186 170  156  144 
SCREW SPEED  rpm  100
CLAMPING UNIT  
CLAMP FORCE  kN  11000
OPEN STROKE  mm  1180
SPACE BETWEEN TIE BARS(W*H)  mm  1180*1100
MAX.MOULD HEIGHT  mm  1200
MIN.MOULD HEIGHT  mm  450
EJECTOR STROKE  mm  325
EJECTOR FORCE  kN  245
OTHER  
MAX.PUMP PRESSURE  MPa  16
PUMP MOTOR POWER  kW  45+55
HEATING POWER kW  57.6
MACHINE DIMENSION(L*W*H)  m  12.20*2.80*3.30
OILTANK CUBAGE L  2100
MACHINE WEIGHT  t  60