injection machine IMM16600

Description

Specification:
 Feature
  1. Clamp unit
 
 The clamping unit is quick moving platen, running placidity moving speed over 36m/min.
  Moving platen supported on the machine bed by adjustable slipping block that made zinc metal, it open and close quickly and lightly.
 
 End point positioning controlled by high precision transducers.
  Tie bars painting hardened Cr can able to bear or endure cauterization and abrasion.
 
 Tie bars with unload slot marches spring nut can be constant of using for long time.
  closing and opening speeds independently set, each programmable in 3 stages. It may be alarm automatic at abnormality.
 
 five points holding pressure to clamping processes computer-optimized.
  2. Injection unit
 
 n opposed cylinders ensure parallel injection movement.
  ew cylinders suitable for up to A, B, C. The screw may be optional 3 kinds of nitride, painting hardening Cr and double metals.
 
 3. Hydraulic system
  ustable backpressure and zero backpressure may be option.
 
 egrations valve board is response soon and high precision.
  raulic system can be able to overload running, sensitive to reasonability, lower pulse and higher stabilization.
 
 4. Electrical control unit
  a) There is 3-manners of manual, semi-auto, automatic in the menu.
 
 b) Controlled several section PID temperatures, monitoring, alarm and diagnosing.
  c) The menu of special computer imported has two color: one is black and write, other color.
 
 
 
SPECIFICATION  
A B C D
INJECTION UNIT  
SCREW DIAMETER  mm  120  130  140  150
SCREW L/D RATIO  L/D  26 24   22 20.5 
SHOT VOLUME(THEORETICAL)  cm3  6672 7831  9080  10423 
INJECTION WEIGHT(PS)  g  6071 7126  8263  9485 
INJECTION RATE  g/s 894  1050  1217  1398 
PLASTICIZING CAPACITY  g/s 128  148  172  210 
INJECTION PRESSURE  MPa 195  165  145  126 
SCREW SPEED  rpm 90 
CLAMPING UNIT  
CLAMP FORCE  kN  16600
OPEN STROKE  mm  1550
SPACE BETWEEN TIE BARS(W*H)  mm  1500*1400
MAX.MOULD HEIGHT  mm  1500
MIN.MOULD HEIGHT  mm  700
EJECTOR STROKE  mm  420
EJECTOR FORCE  kN  420
OTHER  
MAX.PUMP PRESSURE  MPa  17.5
PUMP MOTOR POWER  kW  45+45+45
HEATING POWER kW  91
MACHINE DIMENSION(L*W*H)  m  14.10*3.50*4.10
OILTANK CUBAGE L  3000
MACHINE WEIGHT  t