injection machine IMM7300

Description

Specification:
 Feature
  1. Clamp unit
 
 The clamping unit is quick moving platen, running placidity moving speed over 36m/min.
  Moving platen supported on the machine bed by adjustable slipping block that made zinc metal, it open and close quickly and lightly.
 
 End point positioning controlled by high precision transducers.
  Tie bars painting hardened Cr can able to bear or endure cauterization and abrasion.
 
 Tie bars with unload slot marches spring nut can be constant of using for long time.
  closing and opening speeds independently set, each programmable in 3 stages. It may be alarm automatic at abnormality.
 
 five points holding pressure to clamping processes computer-optimized.
  2. Injection unit
 
 n opposed cylinders ensure parallel injection movement.
  ew cylinders suitable for up to A, B, C. The screw may be optional 3 kinds of nitride, painting hardening Cr and double metals.
 
 3. Hydraulic system
  ustable backpressure and zero backpressure may be option.
 
 egrations valve board is response soon and high precision.
  raulic system can be able to overload running, sensitive to reasonability, lower pulse and higher stabilization.
 
 4. Electrical control unit
  a) There is 3-manners of manual, semi-auto, automatic in the menu.
 
 b) Controlled several section PID temperatures, monitoring, alarm and diagnosing.
  c) The menu of special computer imported has two color: one is black and write, other color.
 
 
 
SPECIFICATION  
A B C D
INJECTION UNIT  
SCREW DIAMETER  mm 90   95 105  110 
SCREW L/D RATIO  L/D  23.2  22  19.9  19
SHOT VOLUME(THEORETICAL)  cm3  2861  3188  3894  4273
INJECTION WEIGHT(PS)  g  2603  2901  3543  3888
INJECTION RATE  g/s  574  640  781  858
PLASTICIZING CAPACITY  g/s  76  85  98  109
INJECTION PRESSURE  MPa  195  175  143  130
SCREW SPEED  rpm 110 
CLAMPING UNIT  
CLAMP FORCE  kN  7300
OPEN STROKE  mm  950
SPACE BETWEEN TIE BARS(W*H)  mm  950*950
MAX.MOULD HEIGHT  mm  960
MIN.MOULD HEIGHT  mm  400
EJECTOR STROKE  mm  280
EJECTOR FORCE  kN  210
OTHER  
MAX.PUMP PRESSURE  MPa  16
PUMP MOTOR POWER  kW  37+37
HEATING POWER kW  46.45
MACHINE DIMENSION(L*W*H)  m  11.00*2.50*2.80
OILTANK CUBAGE L  1200
MACHINE WEIGHT  t  41.5