注塑机IMM20000

产品描述

Specification:
 Feature
  1. Clamp unit
 
 ??The clamping unit is quick moving platen, running placidity moving speed over 36m/min.
  ??Moving platen supported on the machine bed by adjustable slipping block that made zinc metal, it open and close quickly and lightly.
 
 ??End point positioning controlled by high precision transducers.
  ??Tie bars painting hardened Cr can able to bear or endure cauterization and abrasion.
 
 ??Tie bars with unload slot marches spring nut can be constant of using for long time.
  ??closing and opening speeds independently set, each programmable in 3 stages. It may be alarm automatic at abnormality.
 
 ??five points holding pressure to clamping processes computer-optimized.
  2. Injection unit
 
 ??n opposed cylinders ensure parallel injection movement.
  ??ew cylinders suitable for up to A, B, C. The screw may be optional 3 kinds of nitride, painting hardening Cr and double metals.
 
 3. Hydraulic system
  ??ustable backpressure and zero backpressure may be option.
 
 ??egrations valve board is response soon and high precision.
  ??raulic system can be able to overload running, sensitive to reasonability, lower pulse and higher stabilization.
 
 4. Electrical control unit
  a) There is 3-manners of manual, semi-auto, automatic in the menu.
 
 b) Controlled several section PID temperatures, monitoring, alarm and diagnosing.
  c) The menu of special computer imported has two color: one is black and write, other color.
 
 
 
SPECIFICATION  
A B C D
INJECTION UNIT  
SCREW DIAMETER  mm  130
 140  150  160 
SCREW L/D RATIO  L/D 25.8  24  22.4   21
SHOT VOLUME(THEORETICAL)  cm3 8760  10155  11660  13670 
INJECTION WEIGHT(PS)  g  7971 9240  10600  12440 
INJECTION RATE  g/s 1052  1220  1400  1593 
PLASTICIZING CAPACITY  g/s  150  180  206 232 
INJECTION PRESSURE  MPa  190 163  142  125 
SCREW SPEED  rpm 88 
CLAMPING UNIT  
CLAMP FORCE  kN 20000 
OPEN STROKE  mm 1600 
SPACE BETWEEN TIE BARS(W*H)  mm  1650*1500
MAX.MOULD HEIGHT  mm  1620
MIN.MOULD HEIGHT  mm  800
EJECTOR STROKE  mm  420
EJECTOR FORCE  kN  490
OTHER  
MAX.PUMP PRESSURE  MPa 16.5 
PUMP MOTOR POWER  kW  45+55+55
HEATING POWER kW  110.7
MACHINE DIMENSION(L*W*H)  m  15.50*3.75*4.50
OILTANK CUBAGE L  3700
MACHINE WEIGHT  t  156

相关产品展示